Products
Cast Cutter Saw
Product ID : WTT-P150-1
Product Attributes :
| Oscillating Rate≥12500cpm |
| Six-speed levels shifting |
| Output Power 130W |
| Handpiece Weight 1.345KG |
| Color: green/red |
| Soft tissue protection function |
| Can cut gypsum and high polymer bandage |
| 12 Month warranty |
Product Description
Battery powered medical electric plaster cast cutting saw for removing casts
Introduction
The battery powered cast saw oscillates 12,500 times/minute for fast, precision cuts with Six-speed switching. It has skin protection function with quick and stable cast removal. And the handpiece has very light weight of 1345g and total packing is less than 3kg for easy and economical shipping. The cast cutter can cut through various of bandages and casts on patients body, especially polymer bandage, very suitable for use in emergency situations.
Configuration:
1. One cast saw handpiece,
2. Three saw blades,
3. L wrench and saw blade head connector,
4. One Alluminum packing box with outer packing carton size: 39*24*13cm
Features of cast cutter:
1. Oscillating frequency is up to 12500cpm and swing range is ≥ 5°.
2. Input power: 110V+-10% and 220V+-10%
3. No load is ≤ 80dB(A).
4. Six speed levels shifting contributes continuously variable speed
5. The new anti-rotation saw blade has short fixation and long service life.
6. Soft tissue protection function, safe and reliable to use.
7. It is suitable for cutting gypsum and high polymer bandage.
8. Power plug customizable: America, UK, Europe, South America, Australia, etc.
Instruction
- During orthopedic operation, surgeon should hold the cast saw firmly, lay it on the gypsum plaster slightly and cut the cast perpendicularly. Don’t cut it through once if you are not sure (although the saw has soft tissue protection function).
- Cut the plaster vertically, lift it and move forward. Lay it on the lower cutting section slowly and repeat the above process until finishing the task.
When the cast cutter saw teeth are obtunded after a long time of use, loosen the cap and rotate the saw blade counter clockwise with the L shape socket hexagonal wrench, then tighten it clockwise.
Online Inquiry
